Paywelder Welding Pay Tractor
The paywelder welding pay tractor is mainly used for onshore oil and gas pipeline construction process. Used for lifting welding tent when pipeline welding, and providing power for welding equipment.
Technical points and advantages of DP paywelder welding pay tractor:
Design to better performance
Patented design of rigid straight connecting of engine, generator and hydraulic pump
After hydraulic clutch system is designed, unloaded power consumption of pump is only 1.2kw during welding process, while unloaded pump power would be 9.5kw without hydraulic clutch system, only this can saves 8.3kw, and save fuel cost around RMB50,000-100,000 a year(calculation based on Dongfeng Cummins 6BTA5.9-C170,at setting of 1500rmp and fuel consumption rate219g/kwh)
There are embedded hook in the platform to be easily craned up of whole machine.
All hydraulic components are from well-established international brands. Very stable performance, and easy to find spares.
Adopt hydraulic flexible walking system for smooth operations of starting and stopping.
The servo pilot operating system is easy and precise to be operated, and it can realize continuously variable transmission between two different speed settings.
Depending on powerful traction, the machine can achieve steering operation easily on uneven terrain, can walk in sloping area, and has excellent cross-country performance on hilly and wetland areas.
People oriented, comfortable working space
Fairshaped design of operation lab, allows 360 full visibility, and it is more convenient for operating on the construction site.
With its three-level adjustable headrest, the seat is designed in compliance with modern ergonomic standards, to reduce tired feeling.
Easy maintenance to realize the high efficient performance
Overhaul platform at both sides, it is convenient for examining and maintenance of engine, generator and hydraulic system.
The large space can bear 4 welders and other equipment making it convenient for site operations.
With full closed ship from chassis in walking assembly, dirt not easy to store up, cleaning becomes easier and simpler.
Model and specification
Technical Specification of MPS-H80 & MPS-H100 | ||||
Model |
MPS-H80 |
MPS-H100 |
||
Overall Weight |
10300KG |
11500KG |
||
Dimensions(lxwxh) |
5500*2600*3050mm |
5500*2600*3050mm |
||
Recommend carrying electric welding machine number (need customer equip) |
2 units DC400 |
4 units DC400 |
||
Engine |
Type |
Cummins 6BT5.9-C170 |
Cummins 6BT5.9-C180 |
|
Power |
125kw |
132kw |
||
Rotating speed |
2300rpm |
2200rpm |
||
Generator |
Rated power |
80KW |
100KW |
|
Rated capacity |
100KVA |
125KVA |
||
Output powder |
Three phase 380v |
Three phase 380v |
||
Operation System |
Pressure flux |
25mpa/189L/min |
25mpa/189L/min |
|
Traveling |
Indoor hand& |
|||
Generating |
Indoor position joy stick |
|||
Lifting |
Outdoor joy stick |
|||
Travel |
Travel speed |
2.8-4.6km/H |
||
Grade ability |
30° |
30° |
||
Ground pressure |
33/25kpa 39/32kpa |
33/25kpa 39/32kpa |
||
Chassis |
Minimum ground clearance |
490mm |
490mm |
|
Track shoe width |
500mm/600mm |
500mm/600mm |
||
Lifting crane |
Type |
Hydraulic360° swing |
Hydraulic360° swing |
|
Max lifting capacity |
3200kg |
3200kg |
||
Lifting radius |
2100-5320mm |
2100-5320mm |